The MB Sturgis Sturgi-Stay Propane Fill Hose part # 100019-144 along with the MB Sturgis Propane Adapter Fitting part # 402258-MBS is most likely what you are after in order to attach a propane tank to a propane regulator. The POL fitting on one end will attach to the tank and the 1/4" inverted flare fitting will attach to the propane regulator when using the 1/4" inverted flare to 1/4" NPT fitting above. The MB Sturgis Sturgi-Stay Propane Fill Hose is then rated for up to 350 psi. view full answer...
For your 100 lb propane tank mounted on the passenger side, I recommend running the MB Sturgis Sturgi-Stay T-Fitting w Hose - Type 1 Valve - Quick Disconnect, Disposable Cylinder Ports # 103615. This will give you a 72 inch hose from your 100 lb tank to the T-fitting which will connect between one of your 30 lb tanks and the connection to your crossover regulator. This T-fitting will also allow you to run the MB Sturgis Propane Adapter Hose for Small Appliance - Disposable Cylinder Ports... view full answer...
You'd want the Disposable Propane Bottle Adapter Fitting # 37207-30205 used with the Propane Adapter Hose for Small Appliance # 37207-30825 which is a 5 foot propane hose. view full answer...
The # 100555-72-MBS that you mentioned does not have any valves that would close in the event of a leak so it wouldn't stop the flow at all. It basically is just a hose with two different fittings on either end. A Type 1 fitting for connecting to the tank and then a throwaway cylinder port fitting as well. view full answer...
The Disposable Propane Bottle Adapter Fitting # 37207-30175 you were looking at works exactly as you are wanting.
It is designed to allow you to switch your propane supply from a larger exchange propane tank to a 1lb propane tank should you need run out and need propane in a pinch.
I included a video of the # 37207-30175 for you to take a look at. view full answer...
I looked up the Blackstone Griddle online and seen that it accepts a 1 lb propane bottle therefore it would have a disposable cylinder fitting on the end. If that is the case then you can use the MB Sturgis Quick Disconnect Propane Hose part # 100476-120-MBS to attach this to the female quick disconnect port on your trailer.
However, this option most likely will not work for you because the quick disconnect port on your trailer is already ran through the propane regulator. This hose will... view full answer...
The part # 100383-36-MBS is a 3 foot hose that has a male 3/8 NPT fitting on one side and a 1/2 inch female swivel like you said you needed on the other for use with the # 100304-60-MBS. view full answer...
Yes the Camco Brass Propane Tee w/ 4 Ports, 5' Long Supply Hose, and 12' Long Extension Hose part # CAM59123 can easily be added to your 5th wheel camper. It works with both the Type 1 fitting most common on newer propane tanks that thread on the outside of the tank and the POL which is found on older tanks and thread inside the tank. A POL fitting has left hand threads by the way. It will also allow you to connect multiple different accessories with out the need to bring along extra propane... view full answer...
Thanks for the picture of your propane tank. Based on seeing that you would need a Type 1 fitting hose like what the MB Sturgis Propane Tank Extension Hose part # 100914-120-MBS that you referenced has. view full answer...
It is usually best to go with a dual stage propane regulator over a single stage propane regulator as they are more accurate, perform better in the cold, and most can be adjusted. For this, I recommend the MB Sturgis Horizontal 2-Stage Propane Regulator part # 108221. In order to attach the regulator inlet to your 100 lb propane tank you will need the MB Sturgis Sturgi-Stay Propane Fill Hose part # 100019-15 and the MB Sturgis Propane Adapter Fitting part # 402258-MBS. In order to attach... view full answer...
The propane regulator I recommend for your 100 lb propane tank is the MB Sturgis Vertical 2-Stage Propane Regulator part # 108220 which will need to be mounted in a vertical position. In order to then attach this regulator to your 100 lb propane tank you will also need the MB Sturgis Hose Assembly part # 100202 which measures 10' long. These parts are both made in the USA.
If you can let me know what fitting is on your gas stove I can then give you the last hose you need from the regulator... view full answer...
The MB Sturgis # 108220 propane regulator can maintain 11" water column and up to 400,000 BTU/Hour. The only propane valve we have is part of a quick connect fitting like the Camco # CAM59853 for low pressure propane systems.
If you need something different please email me details of what you need. view full answer...
Yes you could use flexible propane hose like the part # 100040-144-MBS which has 3/8 inch fittings and is 12 feet long to move your propane tanks to a different location. view full answer...
The type of adapter hose you'd want to connect a 100 lb propane tank to a Honda generator adapted to work off of propane would be the MB Sturgis Propane Pigtail part # 100575-60-MBS. This has the fittings found on a tank and the inverted flare style of fitting that's used on the generator adapter kits I found for the Honda generators. If you have something different though check out the attached help article I have attached on this page and let me know what you have. view full answer...
If I follow your statement correctly, you are looking for the Camco Propane Hose Assembly, # CAM59823. This hose is made to connect an appliance such as your Grill Boss designed to use a 1-lb disposable propane cylinder to a 20-lb or 30-lb refillable propane tank. Be aware that you can not use two regulators inline with each other, the pressure will not be high enough for the grill to function. This hose will connect directly to one of your RV's propane tanks then to your grill if you... view full answer...
We don't have quick disconnect covers, and since the propane supply on your trailer will be regulated and since you can't regulate propane twice (there will be a regulator on your Weber grill as well), there isn't and adapter available for what you would need.
To grill with your RV's propane source you would need to use a grill like the Camco RV Olympian 6500 Stainless Steel Grill w/ Quick Connect Hose # CAM57245 as it is designed for doing exactly what you are looking to do.
Otherwise... view full answer...
Looks like you are in need of the Propane Adapter Fitting - 1/4" Female Inverted Flare x 1/4" Male NPT # 37207-30045 to replace the fitting you have currently in your regulator. view full answer...
While we do have a hose that will do what you are needing, the Propane Hose with Back Check # 37207-30785 would not be the correct option. This is because a 100 lb. propane tank is going to require a POL tank connection instead of a type 1 connection.
Instead you will want to use the MB Sturgis Propane Supply Hose # 100202.
Or the Propane Hose - POL Pigtail # 37207-30685 if you have an auto change-over regulator because auto change-over regulators typically have a FIF fitting. view full answer...
I do have an option for you but the only hose we offer with these fittings (POL x 1/4" Male NPT) is the MB Sturgis Propane Supply Hose part # 100202 which is 10'. That said, if this is going from the tank to the regulator then you should be able to use the MB Sturgis Propane PigtailHose part # 100019-24 with the Propane Adapter Fitting part # 37207-30035 which is 2'. view full answer...
The requirements for your outdoor range will dictate the correct regulator. That said, the MB Sturgis Horizontal 2-Stage Propane Regulator part # 108221 provides up to a 400,000 Btu per hour output which will surely be enough for your outdoor range. It will also work with a 100 lb propane tank using the MB Sturgis Sturgi-Stay Propane Fill Hose part # 100019-144 and the MB Sturgis Propane Adapter Fitting part # 402258-MBS. view full answer...
Go To Results